CG300 - LCD Retardation and Twist Angle Measurement System

The CG-300 is an automatic system to measure twist angle, retardation value and cell gap.

Functions including:

• Twist Angle Measurement
• Retardation & Cell Gap Measurement
• Polarizer Direction
• Retardation Film Axis

CG300 designed for both transmissive and transflective type LCD including TN/ STN/ FSTN/ CSTN/ TFT cells. This equipment is suitable for R&D, QA and product testing purpose.

Remark for reflective cells ( e.g. LCOS), a modified CGR100 model is available.

Detail Specification

E0200P - Electro-Optical Characteristics Measurement System

The EO-200P is mainly use to do Luminance Voltage Curve & Response Time Measurement.

Functions including :

• Determine LVC properties of LCD
• Determine LCD Response time.
• Analysis optimizing voltage(Vop), V10, V50 & V90 from the LVC
• Achieve contrast ration measurement

EO-200P designed for both transmissive and reflective cellin icluding TN/ STN/ FSTN/ CSTN/ TFT cells. This equipment is suitable for R&D, QA and product testing purpose.

Detail Specification

MT100 - Empty Cell Gap & Color Filter Measurement System

The MT-100 cell gap measurement system is a powerful system that can determine the empty cell gap and color filter characteristics of LCD.

• Cell gap range: 2- 20μm
• 30μm measurement spot size
• Getting transmission & reflection spectrum
• Determine Color Coordinates of color filter versus X, Y
• Customize sample stage, fit for different sample size

Detail Specification

Eldim-EZContrast Viewing Angle Line

A luminance measurement in less than a minute from 0-360° Azimuth, 0 to 88° Incident Angle

• EZContrast XL-88W
• Angular analysis +/- 88 °
• Spot size up to 6 mm
• Working distance 1.2 mm
• Measurement time < 4s
• Interface USB 2.0

Major applications:

Large viewing Angle LCD modules and components, HDTV, PC, avionics, monitors.

Detail

Eidim-MURATest Uniformity Line

The MURATest System are aiming at solving the uniformity checking issue of display by
combining: speed and accuracy of measurement in 2D uniformity analysis of Luminance
and Color Coordinates versus X, Y.

Its function including :

• CCD resolution 1536x1024 ( upto 4096x 4096)
• Working distance from 25cm to infinity R
• Measurement time < 10 s
• Interface USB 2.0
• Major applications Uniformity LCD modules and
• components testing, Mura defect,
• pixel defect, avionics, monitors, HDTV, ...

This equipment is suitable for R&D, QA and product testing purpose.

;

Detail

Eldim-Response time and flicker measurement

Optiscope has been specially designed to address the need for simple and accurate measurements of:

• Flicker
• Response Time and Delay

of displays and especially LCD's.

Owing to its high dynamic range capability and tunable sample rate (from 1μs up to seconds), it also allows many other type of measurements like phosphors decay time as well as OLED response time.

Detail

Eldim-Drivers

ELDIM FPDDrive device generates video graphic patterns and timing for evaluation and integration of display modules, including LCD, PDP an d LED. Designed as a user-friendly, PC-based system, FPDDrive is a complete and cost-effective solution.

FPDDrive package allows to test LCD's and other flat panels in end-user conditions. It can provide different driving format, fully programmable panel definition, data output format, patterns and sequences.

• TTL, LVDS or DVI 1.0 interfaces 1 to 3 options possibility
• Pixel rate up to 320 MHz DVI x2 link or TTL x2 link (224 MHz LVDS x2 link)
• Display size up to UXGAW 1900x1200
• USB 2.0 Plug & play interface

Detail

LCD wave-form generator, WFG50

The WFG500 Waveform Generator delivers arbitrarily placed trigger-pulses and may itself be triggered externally. It can operate in one continuous and two burst modes. The summing module produces a low-voltage superposition of two chosen waveforms. Due to the unique double memory concept the waveforms can be modified during operation. Each output channel contains a very fast high-voltage amplifier. (2 channel version available)